Reznor UDAP150

UDAP-150 V3 T-CORE2 Series Gas Fired Unit Heater, 83% - 150,000 BTU


Reznor UDAP150

UDAP-150 V3 T-CORE2 Series Gas Fired Unit Heater, 83% - 150,000 BTU

This product is currently unavailable.

Quick Specs:

  • Width: 20-1/8"
+ view all specifications

Reznor V3 series model UDAP gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. Sizes 30-125 are approved for residential application. All sizes are approved for commercial/industrial installations. Model UDAP heaters are designed for 82-83% thermal efficiency and are approved for installation in the United States and Canada by the Canadian Standards Association(CSA). Available at AppliancesConnection

Features:

Reznor V3 UDAP Series unit heaters have a refreshing new appearance with a glossy white cabinet finish, unique Reznor mitered corner and less visible hardware. Each size cabinet is easily suspended from either 2 or 4 suspension points, or an optional hanger kit for all sizes allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a "G" terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays). All units have a factory installed gas line nipple to the exterior of the cabinet for easy gas service connection.

The preeminent new internal feature is the T-CORE2 ® heat exchanger and single burner combustion system. Other standard features include a single-stage gas valve, multi-try direct spark ignition with 100% lockout, pressure switch to verify vent flow, resiliently isolated venter motor, venter wheel with improved housing, resiliently isolated axial fan and motor assembly and a high temperature limit control. Sizes 30-125 also include a flame rollout safety switch. Operation is controlled through an integrated circuit board. The circuit board monitors heater operation and has LED diagnostic indicator lights to identify abnormalities in control functions.

The new Reznor UDAP V3 series unit heaters are designed to provide all the features you expect in a Reznor® heater plus improved efficiency, easier installation and a new look - both inside and out. Look for the unique white unit with no visible front and bottom hardware, deep red louvers, black side handle, and angled corner to know you have a genuine Reznor unit by Thomas & Betts.


  • Sizes 30-125 certified for residential heating application.
  • Sizes 30-400 certified for commercial/industrial heating application.
  • 82-83% thermal efficient ~ TOP in its class!
  • 50-60°F Rise range.
  • Arranged for use with natural gas.
  • NEW Tcore3 ® titanium stabilized aluminized steel heat exchanger.
  • NEW patented A Tcore3 ® single burner combustion system including a one-piece burner assembly.
  • 115/1/60 Supply voltage.
  • 115 Volt open fan motor with internal overload protection.
  • Transformer for 24-volt controls.
  • Integrated circuit board with diagnostic indicator lights.
  • Multi-try direct ignition with 100% lockout.
  • Fan relay (included on the circuit board).
  • Single-stage natural gas valve (field adjustable for operation to 9,000 ft. elevation).
  • Vibration/noise isolated fan motor.
  • Sealed control compartment houses all electrical components.
  • 2-pt and 4-pt suspension ~ standard on all sizes.
  • Built-in disconnect switch (20A @ 115V Rating).
  • External terminal strip for 24-volt wiring.
  • Sealed junction box for supply wiring.
  • External gas connection.
  • Fully gasketed door panel with safety door switch.
  • Full fan guard ~ engineered for safety.
  • Improved cabinet design with less visible hardware and a NEW Reznor appearance.

    Reznor V3 series model UDAP gas-fired unit heaters Warranty

    5 years parts / 10 years heat exchanger

    Specifications:

    Heating Input Capacity BTU/h: 150,000
    Heating Output MBH: 124,500
    AFUE: 83%
    Fuel Type: Natural Gas or Propane
    Power Supply Voltage/Frequency/Phase: 115/60/1
    Primary Heat Exchanger Type: Titanium Stabilized Aluminized Steel
    Secondary Heat Exchanger Type: None
    Vent Size (Inches): 5
    Vent Material: Double Wall Galvanized Pipe
    Vent Type: Horizontal or Vertical
    Gas Connection (Inches): 1/2
    Maximum Heat Throw (Ft.): 73
    Maximum Mounting Heights(Ft.): 18
    Air Temp Rise (F): 60
    Air Flow CFM @ 70F (cubic ft/min): 1,921
    Motor HP: 1/4
    Condensate Volume (GPH): 0
    Dimensions (HxWxD) Inches: 20-1/8 x 28-3/16 x 42
    Weight (Lbs): 204
    Warranty: 5 years parts / 10 years heat exchanger

    • Model

    • Brand:Reznor
    • SKU:UDAP150
    • Stock Id:166381

      Appearance

    • Type:Fired Unit Heater
    • Fuel Type:Gas

      Details

    • Volts:115 Volts

      Dimensions

    • Width:20-1/8"

      Technical Details

    • Length:42"
    • Weight (lbs):204
    • Power Source:Propane
    • Brand:WarmlyYours
    • Motor HP:1/4
    • Heating Input Capacity BTU/h:150,000
    • Heating Output MBH:124,500
    • AFUE:83%
    • Power Supply Voltage/Frequency/Phase:115/60/1
    • Primary Heat Exchanger Type:Titanium Stabilized Aluminized Steel
    • Secondary Heat Exchanger Type:None
    • Vent Size (Inches):5
    • Vent Material:Double Wall Galvanized Pipe
    • Vent Type:Horizontal or Vertical
    • Gas Connection (Inches):1/2
    • Maximum Heat Throw (Ft.):73
    • Maximum Mounting Heights(Ft.):18
    • Air Temp Rise (F):60
    • Air Flow CFM @ 70F (cubic ft/min):1,921
    • Condensate Volume (GPH):0
    • Dimensions (HxWxD) Inches:20-1/8 x 28-3/16 x 42

    Shipping Methods & Details


    Customers Also Viewed: Back To Top ↑

    View More »

    Recently Viewed: