Home> Home Furnishing> Chairs> Recliners > 3053T

3053T, 30 Series TALL-Three-Way Reclining Lift Chair:

Product Description

This three-way reclining lift chair is geared towards the taller who is not in need of the wider seat width.  It offers all of the same features as the 3053W, except the width between the armrests is 21",, and the height of the backrest from the top of the seat is 30". Available at AppliancesConnection

Description:

This three-way reclining lift chair is geared towards the taller who is not in need of the wider seat width.  It offers all of the same features as the 3053W, except the width between the armrests is 21",, and the height of the backrest from the top of the seat is 30". 

Features:

  • Magazine pocket on lower, outer right-hand side
  • Armrest and head covers
  • Battery back-up system

Additional Dimensions:

  • Backrest height from top of seat: 30"
  • Footrest to floor when reclined: 22"
  • Back of seat to tip of footrest when reclined: 43"

Chair Frame:

  • Frame of the chair is all kiln-dried hardwood; all stress points are kiln-dried oak
  • All joints are glued and connected with steel fasteners
  • Uni-construction of seat-back assembly is independently lab-tested for strength and durability
  • Gang nails are used at all other critical joints or stress points
  • All bolts used are high quality Grade 5
  • All bolts go entirely through the wood; no lag screws are used to secure the mechanism
  • Mechanism is secured by special locking T-nuts to ensure that it stays tight throughout the lifetime of the chair
  • All critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade quality
  • All wood screws used are the strongest available
  • Corner blocks are used throughout the chair at all critical points for added strength
  • Extra rail across the top of the seat back ensures that the back stays straight and square

Inside:

  • All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unit
  • Seat springs are correctly spaced on the spring rails by a special clip rail machine
  • Front seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durable
  • Retainer rail secured by steel brads on top of the seat springs ensures that they do not loosen
  • 12 gauge back springs are tied together with special tie wire for more comfort and endurance
  • Nova bond pad ensures that the seat springs do not cut into the bottom of the seat foam
  • The fiber used in the backs is a dustless, odorless, non-allergenic, conjugated fiber that is the best found in the industry

Foam:

  • Acella-Flex foam, developed by Leggett & Platt, is the only foam Med-Lift uses - it offers the closest thing to a "perfect seating configuration" that is available in the industry
  • Acella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. person
  • This foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10-15% in size over the first few years
  • Special break-in process before the foam is ever cut makes the foam feel good from the first use on
  • Super soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long life
  • Seat foam is pressure-reducing

Lift base:

  • Super Sag-less lift base (made in the USA) withstands constant use and abuse that a lift chair must endure
  • The most stable base in the upright lifted position that is available in the marketplace today
  • Low volt quiet motor

Fabric:

  • All fabrics used on any Med-Lift chair meet both CAL 117 and UFAC requirements for flammability
  • Independent labs test Med-Lift fabric, foam, and fibers once a year to ensure that they meet correct specifications


Specifications:

 

Width 32 inches
Weight Capacity 375lbs
Seat Width 21 inches
Seat Height 22 inches
Seat Depth 22 inches
Seat Back Height 30 inches
Minimum Depth 3 feet 8 inches
Maximum Depth 6 feet 1 inch
Height 3 feet 8 inches
Weight 170lbs

    Model

  • Brand: MedLift
  • SKU: 3053T
  • Stock Id: 297343
  • Product Number: 3053T

    Technical Details

  • Weight: 170.00 lbs

Product Description

  • Overview

    This three-way reclining lift chair is geared towards the taller who is not in need of the wider seat width.  It offers all of the same features as the 3053W, except the width between the armrests is 21",, and the height of the backrest from the top of the seat is 30". Available at AppliancesConnection

    Description:

    This three-way reclining lift chair is geared towards the taller who is not in need of the wider seat width.  It offers all of the same features as the 3053W, except the width between the armrests is 21",, and the height of the backrest from the top of the seat is 30". 

    Features:

    • Magazine pocket on lower, outer right-hand side
    • Armrest and head covers
    • Battery back-up system

    Additional Dimensions:

    • Backrest height from top of seat: 30"
    • Footrest to floor when reclined: 22"
    • Back of seat to tip of footrest when reclined: 43"

    Chair Frame:

    • Frame of the chair is all kiln-dried hardwood; all stress points are kiln-dried oak
    • All joints are glued and connected with steel fasteners
    • Uni-construction of seat-back assembly is independently lab-tested for strength and durability
    • Gang nails are used at all other critical joints or stress points
    • All bolts used are high quality Grade 5
    • All bolts go entirely through the wood; no lag screws are used to secure the mechanism
    • Mechanism is secured by special locking T-nuts to ensure that it stays tight throughout the lifetime of the chair
    • All critical connection points for the reclining hardware, etc., have a double locking nut of nylon aircraft grade quality
    • All wood screws used are the strongest available
    • Corner blocks are used throughout the chair at all critical points for added strength
    • Extra rail across the top of the seat back ensures that the back stays straight and square

    Inside:

    • All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unit
    • Seat springs are correctly spaced on the spring rails by a special clip rail machine
    • Front seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durable
    • Retainer rail secured by steel brads on top of the seat springs ensures that they do not loosen
    • 12 gauge back springs are tied together with special tie wire for more comfort and endurance
    • Nova bond pad ensures that the seat springs do not cut into the bottom of the seat foam
    • The fiber used in the backs is a dustless, odorless, non-allergenic, conjugated fiber that is the best found in the industry

    Foam:

    • Acella-Flex foam, developed by Leggett & Platt, is the only foam Med-Lift uses - it offers the closest thing to a "perfect seating configuration" that is available in the industry
    • Acella-Flex pushes back 1 pound for every pound of weight that is exerted on it, making the chairs sit the same for a 90 lb. person as for a 300 lb. person
    • This foam will keep 99.9% of its original shape and size, whereas most conventional foam will shrink 10-15% in size over the first few years
    • Special break-in process before the foam is ever cut makes the foam feel good from the first use on
    • Super soft layer glued on top of the Acella-Flex gives a very nice feel to the seat, while allowing all the benefits of the Acella-Flex base for strength and long life
    • Seat foam is pressure-reducing

    Lift base:

    • Super Sag-less lift base (made in the USA) withstands constant use and abuse that a lift chair must endure
    • The most stable base in the upright lifted position that is available in the marketplace today
    • Low volt quiet motor

    Fabric:

    • All fabrics used on any Med-Lift chair meet both CAL 117 and UFAC requirements for flammability
    • Independent labs test Med-Lift fabric, foam, and fibers once a year to ensure that they meet correct specifications


    Specifications:

     

    Width 32 inches
    Weight Capacity 375lbs
    Seat Width 21 inches
    Seat Height 22 inches
    Seat Depth 22 inches
    Seat Back Height 30 inches
    Minimum Depth 3 feet 8 inches
    Maximum Depth 6 feet 1 inch
    Height 3 feet 8 inches
    Weight 170lbs

      Model

    • Brand: MedLift
    • SKU: 3053T
    • Stock Id: 297343
    • Product Number: 3053T

      Technical Details

    • Weight: 170.00 lbs
  • Shipping

      Model

    • Brand: MedLift
    • SKU: 3053T
    • Stock Id: 297343
    • Product Number: 3053T

      Technical Details

    • Weight: 170.00 lbs

Questions & Answers

User Reviews

Be the first to review this product

Write A Review

Get paid to review this product!

If you have used this product, simply log in and share your text, video and photo review of it!
View our rewards program page for details

Submit a text review
Earn $5.00

Submit a photo review
Earn $7.50
Submit a video review
Earn $10.00
WRITE A REVIEW
Upload File Icon Preview Kitchen My Account Phone Cart Orders Tickets Wishlist Notifications My Account Track Your Order Log Out Article Appliances Connection Blog Facebook Twitter Google+ YouTube Pinterest Instagram Video Star Wishlist Refer To Friends Share This Print Rewards Program List View Grid View Dual Fuel Electric Gas Liquid Propane Natural Gas Woodburning GE Fit Guaranteed Cooling Only Provide Cooling and Heating Rebate Redemption Free 3-Year Warranty White Glove Delivery Service Free Installation Service Free Removal Services Color Spectrum Payment Methods Brands Navigation Deals Navigation Download This Rebate