Friedrich PDE09K3SG

PDE09K3SG 9000 BTU Electronic Heat Cool Air Conditioner with One-Touch Operation, Remote Thermostat Operation, Room Freeze Protection and Quiet Start in White


Friedrich PDE09K3SG

PDE09K3SG 9000 BTU Electronic Heat Cool Air Conditioner with One-Touch Operation, Remote Thermostat Operation, Room Freeze Protection and Quiet Start in White

In Stock Details Usually Ships Same Day QuickShip

[More than 10 available]

Quick Specs:

  • Width: 42"
  • Height: 16"
  • Depth: 13.75"
View All Specifications
  • Was: $823.90
Today's Price: $749.00
& Free Shipping
You Save: $74.9 (9.09%). Ends 09/28
Qty:

Enter zip code for deals and promotions:

go

Select Installation / Haul Away for Air Conditioners

Earn Reward Points
Learn more »

The PDE09K3SG 9000 BTU Electronic Heat Cool Air Conditioner features 3 fan speeds heating and cooling. The digital temperature readout monitoring desired room temperature is controlled more precisely than conventional systems. The large, easy-to-read LED display can show either the set point or actual room temperature as selected by owner. The fan start and stop delays prevent abrupt changes in room acoustics due to the compressor energizing or stopping immediately. Upon call for cooling or heating, the unit fan will run for five seconds prior to energizing the compressor. Also, the fan off delay allows for "free cooling" by utilizing the already cool indoor coil to its maximum capacity by running for 30 seconds after the compressor. Available at AppliancesConnection

Features:

Digital Temperature Readout
By digitally monitoring desired room temperature, the room is controlled more precisely than conventional systems. The large, easy-to-read LED display can show either the set point or actual room temperature as selected by owner.

One-Touch Operation
When the unit is powered off, the unit can be returned directly to heating or cooling mode by pressing the 'Heat' or 'Cool' buttons without the confusing power up sequence of some controls.

Individual Mode & Fan Control Buttons
By having separate control buttons and indicators for both fan and mode settings, the Friedrich digital control eliminates the confusion of previous digital PTACs. The accurate temperature setting provides greater guest comfort than other systems.

Quiet Start/Stop Fan Delay
The fan start and stop delays prevent abrupt changes in room acoustics due to the compressor energizing or stopping immediately. Upon call for cooling or heating, the unit fan will run for five seconds prior to energizing the compressor. Also, the fan off delay allows for "free cooling" by utilizing the already cool indoor coil to its maximum capacity by running for 30 seconds after the compressor.

Remote Thermostat Operation
Some applications require the use of a wall-mounted thermostat. All new Friedrich PTACs may be switched from unit control to remote thermostat control easily without the need to order a special model or accessory kit.

Internal Diagnostic Program
The new Friedrich digital PTAC features a self diagnostic program that can alert maintenance to component failures or operating problems. The internal diagnostic program saves properties valuable time when diagnosing running problems.

Service Error Code Storage
The self diagnosis program will also store error codes in memory if certain conditions occur and correct themselves such as extreme high or low operating conditions or activation of the room freeze protection feature. Storing error codes can help properties determine if the unit faced obscure conditions or if an error occurred and corrected itself.

Electronic Temperature Limiting
The new electronic control allows owners to set operating ranges for both heating and cooling independently of one another.

Room Freeze Protection
When the PTAC senses that the indoor room temperature has fallen to 40°F, the unit will cycle on the fan (high) and the electric strip heat to raise the room temperature to 46°F, and then cycle off again. This feature works regardless of the mode selected and can be turned off.

Random Compressor Restart
Multiple compressors starting at once can often cause electrical overloads and premature unit failure. The random restart delay eliminates multiple units from starting at once following a power outage or initial power up. The compressor delay will range from 180 to 240 seconds.

DiamonBlue Technology
Diamonblue seacoast protection protects the outdoor coil from harsh environments. Comes standard on all models.

Digital Defrost Thermostat
The new Friedrich PTAC uses a digital thermostat to accurately monitor the outdoor coil conditions to allow the heat pump to run whenever conditions are correct. Running the PTAC in heat pump mode saves energy and reduces operating costs. The digital thermostat allows maximization of heat pump run time.

Even Heat Monitoring
The digital control monitors indoor conditions to ensure that the room temperature is within five degrees of the setpoint. If necessary, the unit will cycle the electric heat to maintain the temperature.

Separate Heat/Cool Fan Cycle Control
Fan continuous mode is used to keep constant airflow circulation in the room during all times the unit is 'ON'. The ability to set the fan cycling condition independently between heating and cooling mode will increase user comfort by allowing constantly circulating air.

Emergency Heat Override
In the event of a compressor failure in heat pump mode, the compressor may be locked out to provide heat through the resistance heater. This feature ensures that even in the unlikely event of a compressor failure, the room temperature can be maintained until the compressor can be serviced.

Desk Control Ready
All Friedrich digital PTACs have low voltage terminals ready to connect a desk control energy management system. Controlling the unit from a remote location like the front desk can reduce energy usage and requires no additional accessories on the PTAC unit.

Indoor Coil Frost Sensor
The frost sensor protects the compressor from damage in the event that airflow is reduced or low outdoor temperatures cause the indoor coil to freeze. When the indoor coil reaches 30°F, the compressor is disabled and the fan continues to operate based on demand. Once the coil temperature returns to 45°F, the compressor returns to operation.

Ultraquiet Air System
The new Friedrich PD series units feature an indoor fan system design that reduces sound levels without lowering airflow or preventing proper air circulation.

High Efficiency
The Friedrich PTAC has been engineered so that all functional systems are optimized so that they work together to deliver the highest possible performance.

Dual Motor
With Friedrich's new dual-motor design the indoor motor can run at slower speeds which reduces sound levels indoors.

Rotary Compressor
High efficiency rotary compressors are used on all Friedrich PTACs to maximize durability and efficiency.

Stainless Steel Endplates
Outdoor coil endplates made from stainless steel reduce corrosion on the outdoor coil common with other coil designs.

Top-Mounted Antimicrobial Air Filters
The return air filters feature an antimicrobial element that has proven to prevent mold and bacterial growth in laboratory testing. All filters are washable, reusable and easily accessed from the top of the unit without the removal of the front cover.

Filtered Fresh Air Intake
Friedrich PTAC units are capable of introducing up to 75 CFM of outside air into the conditioned space. The outdoor air passes through a washable mesh screen to prevent debris from entering the airstream.

R-410A Refrigerant
Friedrich PTAC units use environmentally-friendly refrigeran.

Specifications:

Type Wall
Chassis Type Through The Wall
Cooling Capacity (BTU) 9000
Heat Electric Heat
Heating Capacity (BTU) 10,236
Wireless Remote Controller No
Energy Star No
Volts 230 Volts
Plug Type 6-20P
Control Type Digital
Maximum Cooling Amps 3.7 Amps
Maximum Cooling Watts 800 Watts
Maximum Heating Amps 13.2 Amps
Maximum Heating Watts 3,000 Watts
CFM Room Circulation 360 CFM
Energy Efficiency Rating 11.3
Remote Control Included No
Dimensions
Width 42"
Depth 13.75"
Height 16"

 

    Model

  • Brand:Friedrich
  • SKU:PDE09K3SG
  • UPC:724587431421
  • Stock Id:391862

    Appearance

  • Color:White
  • Type:Wall
  • Chassis Type:Through the Wall

    Details

  • Cooling Capacity (BTU):9000
  • Heating Capacity (BTU):10,236
  • Volts:230 Volts
  • Heat:Electric Heat
  • Plug Type:6-20P
  • SEER:N/A
  • Wireless Remote Controller:No

    Dimensions

  • Width:42"
  • Height:16"
  • Depth:13.75"

    Technical Details

  • Energy Star:No
  • Energy Efficiency Rating:11.3
  • Control Type:Digital
  • CFM Room Circulation:360 CFM
  • Maximum Cooling Amps:3.7 Amps
  • Maximum Cooling Watts:800 Watts
  • Maximum Heating Amps:13.2 Amps
  • Maximum Heating Watts:3,000 Watts

Room Freeze Protection

The unit can be set to automatically heat the room if it drops below a certain temperature. Don't come home to an igloo!

Internal Diagnostic Program

This unit features electronic codes and internal diagnostic programs to quickly identify problems and display on the LED screen.

Remote Thermostat Operation

Some applications require the use of a wall-mounted thermostat. All new Friedrich PTACs may be switched from unit control to remote thermostat control easily without the need to order a special model or accessory kit.

Associated Service Corporation ASA

10 Year Major Component Warranty

$49.99

Qty: Add to Cart Free Shipping

Shipping Methods & Details


  • Please enter your shipping ZIP Code to get available shipping methods and cost:


Appliance Warranties:View More »

Customers Also Viewed: Back To Top ↑

View More »

Recently Viewed: