UDAP-200 V3 Shop Heater Gas Fired Unit Heater, 83% - 200,000 BTU
- Width: 20-1/8"
Reznor V3 series model UDAP Gas-Fired Unit Heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. Sizes 30-125 are approved for residential application. All sizes are approved for commercial/industrial installations. Model UDAP heaters are designed for 82-83% thermal efficiency and are approved for installation in the United States and Canada by the Canadian Standards Association(CSA).
- Sizes 30-125 certified for residential heating application.
- Sizes 30-400 certified for commercial/industrial heating application. 82-83% thermal efficient ~ TOP in its class!
- 50-60°F Rise range.
- Arranged for use with natural gas.
- NEW Tcore3 ® titanium stabilized aluminized steel heat exchanger.
- NEW patented A Tcore3 ® single burner combustion system including a one-piece burner assembly.
- 115/1/60 Supply voltage.
- 115 Volt open fan motor with internal overload protection.
- Transformer for 24-volt controls.
- Integrated circuit board with diagnostic indicator lights.
- Multi-try direct ignition with 100% lockout.
- Fan relay (included on the circuit board).
- Single-stage natural gas valve (field adjustable for operation to 9,000 ft. elevation).
- Vibration/noise isolated fan motor.
- Sealed control compartment houses all electrical components.
- 2-pt and 4-pt suspension ~ standard on all sizes.
- Built-in disconnect switch (20A @ 115V Rating).
- External terminal strip for 24-volt wiring.
- Sealed junction box for supply wiring.
- External gas connection.
- Fully gasketed door panel with safety door switch.
- Full fan guard ~ engineered for safety.
- Improved cabinet design with less visible hardware and a NEW Reznor appearance.
- Reznor Shop Heater, UDAP-200 V3 Gas Fired Unit Heater Warranty
- Heating Input Capacity BTU/h: 200,000
- Heating Output MBH: 166,000
- AFUE: 83%
- Fuel Type: Natural Gas or Propane
- Power Supply Voltage/Frequency/Phase: 115/60/1
- Primary Heat Exchanger Type: Titanium Stabilized Aluminized Steel
- Secondary Heat Exchanger Type: None
- Vent Size (Inches): 5
- Vent Material: Double Wall Galvanized Pipe
- Vent Type: Horizontal or Vertical
- Gas Connection (Inches): 1/2
- Maximum Heat Throw (Ft.): 93
- Maximum Mounting Heights(Ft.): 18
- Air Temp Rise (F): 60
- Air Flow CFM @ 70F (cubic ft/min): 2,562
- Motor HP: 1/6
- Condensate Volume (GPH): 0
- Dimensions (HxWxD) Inches: 20-1/8 x 28-3/16 x 42
- Weight (Lbs): 219
- Warranty: 5 years parts / 10 years heat exchanger
- Stock Id:166382
- Type:Fired Heater
- Fuel Type:Gas
- Weight (lbs):219
- Power Source:Natural Gas
- Motor HP:1/6
- Heating Input Capacity BTU/h:200,000
- Heating Output MBH:166,000
- Power Supply Voltage/Frequency/Phase:115/60/1
- Primary Heat Exchanger Type:Titanium Stabilized Aluminized Steel
- Secondary Heat Exchanger Type:None
- Vent Size (Inches):5
- Vent Material:Double Wall Galvanized Pipe
- Vent Type:Horizontal or Vertical
- Gas Connection (Inches):1/2
- Maximum Heat Throw (Ft.):93
- Maximum Mounting Heights(Ft.):18
- Air Temp Rise (F):60
- Air Flow CFM @ 70F (cubic ft/min):2,562
- Condensate Volume (GPH):0
- Dimensions (HxWxD) Inches:20-1/8 x 28-3/16 x 42