Description:
The optional side shelf sets, available in every stove color, install in seconds to create an old-world look for your Heritage stove. The unique burner system, designed specifically to fit the Heritage stove, features precision-port technology to produce vibrant flames. The all-new ceramic material burner glows just like an actual ember bed. Topped off with the hand-painted seven-piece all-new ceramic log set, the effect is as realistic as a gas-fired hearth system gets and guaranteed to keep you and your guests mesmerized for hours.
Direct-Vent System
The Heritage direct-vent model uses standard 4 x 6-5/8 vent pipe and, at up to 32,000 BTU input with Natural Gas (30,000 LP), generates sufficient heat to warm any room in your home or provide total heat for a small cabin. Your dealer can help you determine your heating requirements. A direct-vent system draws in outdoor air to support combustion and sends its exhaust directly outdoors.
At 99.9-percent efficient, the 32,000 Btu vent-free system is the ultimate supplemental heat source for any home. The clean-burning technology employs oxygen depletion sensor technology to continuously monitor your room air and instantly shut off the gas well before the oxygen drops to an unsafe level.
Features:
Key Features
-
The Heritage stove is approved to be placed on carpet, tile, and other flat surfaces without a floor pad
-
Heritage Gas Stoves include a hand-painted six-piece log set and a ceramic burner
-
Rated 32,000 BTU input for natural gas
-
Assembled in one carton, for easier set-up
Horizontal Direct-Vent Kit includes:
-
24" Black Pipe (46DVA-24B)
-
4" ID 8" Pipe Ext. Black (46DVA-08AB)
-
Round Ceiling Support/Wall (46DVA-DC)
-
4 x 6 Diameter Wall Thimble (46DVA-WT)
-
4 x 6 Termination Cap (46DVA-HCC)
-
90 Degree Elbow (46DVA-E90B)
Vertical Direct-Vent Kit includes:
-
48" Length Pipe (46DVA-24B)
-
Adjustable Flashing (46DVA-F6)
-
Round Ceiling Support/Wall (46DVA-DC)
-
Storm Collar (46DVA-SC)
-
Ceiling Firestop (46DVA-FS)
-
High Wind Termination Cap (46DVA-VCH)
Specifications:
|
Iron Pipe Size (N.P.T.): |
1/2" |
|
Ignition System: |
Standing Pilot/Piezo |
|
BTU Input: |
32,000 |
|
Dimensions |
|
Height: |
27-3/4" |
|
Width: |
28-1/16" |
|
Depth: |
17-1/8" |
|
Gas Inlet: |
1/2" |
|
Minimum Clearances to Combustibles |
|
Back: |
1" |
|
Sides: |
6" |
|
Top: |
36" |
|
Corners (45 degree corner installation): |
4" |
|