Best P1951M70CMSS Cabinet Hood & Wood Hood Blower,Lighting Pack with Quiet, Internal Blower, High-Efficiency, Single Or Dual Motors, Two 20-Watt Halogen Lamps Provided, Stainless Steel
Best quality design and craftsmanship in a unit that mounts flush with the bottom of cabinets or in a custom hood. Conveniently located 3-speed push button control for easy operation. Full metal construction; both flame retardant and easy to clean.
Features:
Quiet, internal blower with high-efficiency single or dual motors, producing 400 CFM.
6" round (400 CFM) duct connector with built-in backdraft damper.
Available in 52 cm (400 CFM only)
Two 20-watt halogen lamps provided.
Available in stainless steel, black or white.
Charcoal filter kit available on P1951M to allow filtered air to be recirculated into the kitchen (some duct work required).
Install hood so that the bottom of the unit is a minimum of 24" above the cooking surface and it is recommended for good capture, that the maximum be 30" above cooking surface.
Specifications:
Finishes:
430 Grade Brushed Stainless Steel, Black, White
Lighting:
(2) Halogen - GU10
Lighting Levels:
1
Controls:
3 Speed Push Button Control
Feature:
Heat Sentry
Remote:
N/A
Filter:
Aluminum Mesh
Optional Filters:
N/A
Backsplash:
N/A
Flue Extension (Vented Applications Only):
N/A
Deco Trim:
N/A
Liners:
L70
Shelves:
N/A
Mechanical Specifications
Blower:
Internal
Performance (CFM):
400
Sones:
8
HVI:
Yes
Electrical Amps @ 120 Volts:
3.2
Electrical Connection:
Direct
Duct Size (in.):
6-in. Round
Duct Direction:
Vertical
Non-Ducted Capability - Recirculating Flue:
Add Duct
Non-Ducted Capability - Recirculating Kit:
ROUNDFILTER
Dimensions
Width (in.):
27 9/16
Depth (in.):
11 1/4
Height (in.):
9 5/8
Height above Cooktop (Range of recommended mounting heights above the cooking surface (assumes cooktop to be 36" above floor):
The distance above a cooktop must not be less than 24".
A maximum of 30" above the cooktop is highly recommended to maintain the best capture of cooking impurities.
(Distances over 30" are at the installer's and user's discretion)