Phone #: 800-299-9470
Thermador Professional Series PCG366G 36" Sealed Burner Gas Rangetop With 6 Pedestal Star Burner, Patented Star Burners, ExtraLow, QuickClean Base, Precision Simmering, Island Trim, In Stainless Steel
Brand: Thermador
Part Number: PCG366G

See Price in CartFree ShippingRebate Available

Product Details:


•Exclusive, patented Star Burner - most even heating, unsurpassed flame coverage
•Every burner 18,000 BTU (NG)
•Precision simmering capabilities as low as 100°F (375 BTU) with 2 ExtraLow Simmer burners
•Widest range of simmer options from 375 BTU to 3,000 BTU

•Bold Professional design
•Patented Pedestal Star Burner with Quick Clean Base
•Restaurant style metal knobs
•Professional style, continuous cast iron grates
•Continuous porcelain, easy to clean cooking surface

•Star design delivers superior heat spread for any size pan
•Simmer without stirring/scorching with exclusive ExtraLow
•Quick Clean Base designed for easy surface cleaning
•Signature blue indicator lighting
•Island trim shipped standard with rangetop

Installation Options
•To ensure professional results, the cabinet and counter top openings should be prepared by a qualified cabinet worker.
•The rangetop can be installed in various positions with the front either flush or projecting, depending on the counter top's depth.
•The rangetop is designed to hang from the counter top by it's side flanges.
•The counter top however, must be strong enough to support the rangetop.
•It may be necessary to add a supporting cleat along each side or a 2 x 4 corner brace.
•Another alternative would be to construct a deck to set the rangetop on.
Above a Warming Drawer
•Thermador Professional Rangetops may be installed above a Thermador Warming Drawer to create a convenient cooking center.
•A minimum of 2 3/4" clearance is required between the bottom of the rangetop and the top of the warming drawer.

•A backguard must be installed when there is less than a 12" horizontal clearance between combustible materials and the back edge of the rangetop.
•The Thermador Low Backguard must be ordered separately and installed at the rear of the rangetop.
•For island installations and other installations with more than 12" clearance, the provided stainless steel island trim will cover the backguard mounting flanges.

Natural Gas or LP
•Thermador Professional Rangetops are shipped by the factory to operate on natural gas.
•They must be converted for use with propane.
•Verify the type of gas being used at the installation site matches the type of gas used by the appliance.
•If the location/job site requires conversion from natural gas to propane (LP), order PALPKITHC.
•Field conversion must be done by qualified service personnel only.

•We strongly recommend that a Thermador Professional Wall or Island Hood or Custom Insert be installed with all Thermador Professional Rangetops.
•Downdraft ventilation should not be used. Do not install a microwave-hood combination above the rangetop, as these types of units do not provide the proper ventilation and are not suitable for use with Thermador Professional Rangetop


Dimensions & Weight
Overall Width: 35 15/16"
Overall Depth: 25 13/16" (includes gas connection)
Overall Height including Gas Connection: 10 9/16"
Overall Height without Gas Connection: 8 1/16"
Required Cutout Width: 35 1/8"
Required Cutout Depth: 22 13/16"
Required Cutout Height: 7 11/16"
Minimum Distance from Rear Wall: 12"
Approximate Shipping Weight: 145 lbs.
Rangetop Features
Total Number of Rangetop Burners: 6
Cooking Surface: Porcelain
Gas Cooktop Burners: 6 @ 18,000 BTU
Center Front Burner: Yes
Center Back Burner: Yes
Center Electric Griddle: N/A
Gas/Electrical Requirements
Total Natural Gas Connection Rating: 108,000 BTU
LP Convertible: Order Kit PALPKITHC
Total LP Gas Connection Rating: 90,000 BTU
Electrical Supply: 120V AC, 60 Hz
Required Circuit Breaker: 10 Amp
Power Cord: 96", 3-wire
Natural Gas Inlet Connection: 1/2" NPT (min. 3/4" dia. flex line)
Natural Gas Supply Pressure: 6" min. to 14" max. water column (14.9 Mb to 34.9 Mb)
Natural Gas Manifold Pressure: 5" water column (12.5 Mb)
Liquid Propane Inlet Connection: 1/2" NPT (min. 3/4" dia. flex line)
Liquid Propane Supply Pressure: 11" min. to 14" max. water column (27.4 Mb to 34.9 Mb)
Liquid Propane Manifold Pressure: 10" water column (24.9 Mb)
12" Low Backguard: PA36GLBC
Griddle Fits over Two Burners: PAGRIDDLE
12" Grill with Drip Tray: PA12GRILHC
12" Griddle Cover: PA12GCVRHC
12" Maple Chopping Block: PA12CHPBLK
24" Maple Chopping Block: PC24CHPBLK
Black Metal Knob Kit: PAKNOBLK
Blue Metal Knob Kit: PAKNOBLU
LP Conversion Kit: PALPHITHC