Phone #: 800-299-9470
Friedrich S24YF 22,200 BTU Ceiling and Floor Universal Ductless Split System with Heat Pump, Advanced Inverter Technology and 518 CFM Room Air Circulation (MS24Y3F Indoor /MR24UY3F Outdoor)
Brand: Friedrich
Part Number: S24YF

$2,339.00
See Price in CartFree Shipping


Product Details:

Description:

This universal system provides for more mounting options. It may be be located low against the wall or on the ceiling.

The S24YF Ductless Split System features a new level of system flexibility and control at your fingertips with the Advanced Inverter Technology. Inverter Technology lets you reach the desired temperature FASTER, maintain it MORE ACCURATELY, and REDUCE energy costs. It eliminates the constant compressor start-ups/ shut-downs required to maintain the set temperature with traditional technology. It controls compressor rotation speed precisely and adjusts capacity to meet demand, which in turn reduces energy consumption.

Inverter Technology allows each system to adjust capacity and cooling output to provide only the amount of cooling needed at a given time. For example, an 18,000 BTU/h system will operate even more efficiently as a 15,500 if that is all that's needed.

All of the Friedrich ductless split systems exceed the new 13.0 SEER requirements. And, a full one-third of the models have super high ratings ranging from 16.5 to 19.0 SEER.

Units are fully programmable, so setting and keeping the desired comfort level is a snap. Smart features like "Sleep Timer" and "Energy Saver" allow the user to program the unit for optimum energy savings. The continuous "Air Sweep" auto louvers gently distribute cool or warm air throughout the room.

A new level of system flexibility and control is at your fingertips on Friedrich single and multi-zone systems. You'll have more options for optimum comfort, control and energy savings.

Over 20 single, dual, tri- and quad-zone systems provide a wide range of heating and cooling options for even the toughest remodels, additions and improvements.

The Friedrich ductless split systems have the advantages of a ducted installation without the high material and labor costs. Absolutely no ductwork is required, so most systems can be installed and running in a few hours.

Residential/Commercial Applications

Computer rooms/ server rooms

Room additions/ renovations

Homes without ductwork

Kitchen and prep areas in restaurants

Offices in warehouse spaces or large retail buildings

Offices and buildings where security concerns prevent the installation of window units

Features:

MS24Y3F Indoor Unit /MR24UY3F Outdoor Unit
22,200 BTU/h
Heat pump operation
15.0 SEER
More mounting options. This system will mount on the floor or on the ceiling for added design flexibility
Inverter technology allows systems to operate more efficiently and effectively by adjusting capacity and cooling output to precisely meet demand
Variable Capacity Advantages mean a new level of system flexibility and control
Fully featured for total convenience:
Monitors and maintains set point
Programmable
24-hour timer
Sleep timer
Energy Saver
Continuous air sweep
Wireless remote control
Four fan speeds plus auto fan
Auto/cool/dry fan modes
Auto restart
Washable air filters
Auto shut flaps
Easy installation - Your system will be up and running in just a few short hours in most cases
Low installed cost - Ductless systems have a clear advantage over central air conditioning when ducts are not already present
Lower utility bills - Unlike central air conditioners that cool all the areas the same, ductless systems cool only those rooms you tell it to.
No more wasted dollars on cooling unused rooms.
Ultraquiet operation - Ductless systems are in sharp contrast to other types of air conditioners where the rush of air from ducted vents can be annoying, or where compressor noise of window units can be objectionable
Security advantage - Only a small 3 inch hole is needed for connecting indoor and outdoor units.
No worries about intrusion through window installations or wall openings.
Low ambient cooling - All models feature built-in controls that allow the unit to cool even when outdoor temperatures fall to 0°F.
An important feature typically required for computer, telecom and electronic gear rooms, or any other room requiring year-round cooling

Specifications:

Dimensions & Weight
Indoor Unit Width: 39"
Indoor Unit Height: 7 7/8"
Indoor Unit Depth: 25 3/4"
Indoor Unit Net Weight: 62 lbs.
Indoor Unit Shipping Weight: 82 lbs.
Outdoor Unit Width: 35 3/8"
Outdoor Unit Height: 32 5/8"
Outdoor Unit Depth: 13"
Outdoor Unit Net Weight: 141 lbs.
Outdoor Unit Shipping Weight: 154 lbs.

Performance Ratings
Indoor Model: MS24Y3F
Outdoor Model: MR24UY3F
Capacity Cooling: 22,200 BTU/h
Capacity Heating @ 47°F: 24,200 BTU/h
Capacity Heating @ 17°F: 20,100 BTU/h
HSPF: 8.5
SEER: 15.0
Moisture Removal: 7.4 Pts/h
Airflow (Low, Med, High): 371/436/518 CFM
Sound Rating - Indoor: 38/43/47 dB-A
Sound Rating - Outdoor: 53 dB-A
Operating Range - Cool: 0 - 115°F
Operating Range - Heat: 14 - 75°F

Electrical Data (all indoor units receive power from outdoor unit; values listed are total)
Power Source: 230/208-60-1
Min. Ampacity: 15.5 A
Cooling Watts: 2,250 W
Max. TD Fuse/Breaker: 20 A

Refrigeration System
Refrigerant: R410A
Compressor Type: Inverter (Twin Rotary)
Connections: Flare
Liquid Line O.D.: 3/8"
Suction Line O.D.: 5/8"
Factory Precharge: 50 ft.
Max. Line Length: 165 ft.
Max. Height Difference: 66 ft.