Panasonic’s Ductless Split Heat Pump products offer wide versatility in solving your cooling and heating requirements for a single or multiple rooms.
The Indoor unit(evaporator) is mounted inside the room, enclosed in a handsome space saving cabinet. It is connected to the outdoor unit(condenser) via refrigerant lines & inter-unit wiring through a 3-1/2” opening in the wall. Since no ductwork is required, installation is simple, fast & efficient. The indoor unit has been uniquely designed to provide Whisper Quiet operation while delivering comfort throughout the room(s). Panasonic Ductless Split Systems bring together sleek styling in wall, duct or ceiling mounted systems, with whisper quiet operations, quality & reliability you can count on.
Microprocessor control ensures that the temperature and humidity levels in the room are always comfortable.
Wireless Remote Control
Panasonic’s infrared Remote Control with and easy to read LCD Display, gives the user the capability to adjust & set: temperature, sweep (louver control), fan speeds, timer and more, for complete automatic operation.
Details of previous warnings are stored and can be verified on the liquid crystal display. This makes it easier to diagnose malfunctions, greatly reducing service labor. (Wired remote controller)
By coupling compressor and fan operation, intermittent operation can be precisely controlled according to room temperature, so that air is efficiently dehumidified.
3 Fan Speeds and Automatic Fan Operation
Convenient microprocessor control automatically adjusts fan speed to High, Medium or Low. According to room temperature to maintain a comfortable airflow throughout the room.
Air Sweep Control
The air sweep function moves the louver up and down in the air outlet, directing air in a “sweeping” motion around the room and providing comfort in every corner.
Louver can be manually set to the desired angle by remote control.
Automatic Heating and Cooling Changeover
After setting the temperature and functions you desire, just relax. If the room temperature is higher than the set temperature, cooling operation begins. If the room temperature is lower than the set temperature, heating operation begins. During normal thermostat cycle operation, cooling and heating operations automatically change in accordance with set temperature, time and room temperature. (Single Zone Heat Pump unit only)
Hot Start Heating System
Right from the start, air is warm and comfortable. The Hot Start Heating System prevents any cold blasts at the beginning while the heat pump is warming up. (Heat pump unit only)
24-hour Clock with ON/OFF Program Timer
The remote control unit allows you to set a wide variety of timer-based operations. Such functions include automatic ON/OFF with a timer setting, same time ON/OFF every day, ON timer, OFF timer and Combination timer.
1-hour OFF Timer
When this button is pushed either while the unit is operating or while it is stopped, the unit will operate for one hour and then switch off automatically.
Automatic Restart Function after Power Failure
This feature allows the system to automatically resume operation at its preset program, after power is restored from a power failure.
Low Ambient Operation
Operates in cooling mode as low as 0°F
Electric Refrigerant Control Valve
The circulation volume of the refrigerant is controlled by a pulse type electric control valve. In order to attain optimum efficiency, when the power is switched ON, the opening degree of the electric control valve is controlled between 90 and 480 steps.
LOW, low fan speed for extra quiet operation.
| Type || Wall Mounted |
| Unit || Heat Pumps |
| Indoor Unit || CS-KE36NKU |
| Outdoor Unit || CU-KE36NKU |
| Performance & Electrical Ratings |
| Capacity Cooling (Btu/h) || 34,000 (10,900~34,000) |
| Capacity Heating (Btu/h) || 36,000 (14,000~36,000) |
| Moisture Removal - High - Pints/H || 10.64 |
| Dry Air Flow - High -CFM || 630 |
| Dry Air Flow - Medium -CFM || 530 |
| Dry Air Flow - Low -CFM || 412 |
| SEER - Cooling || 16 |
| EER - Cooling || 8.5 |
| HSPF - Heating || 9 |
| Power Supply V, Phase, Hz || 230/208V, 1PH, 60Hz |
| Running Amps - Cooling - A || 20 (5 ~ 20) / 21.9 |
| Running Amps - Heating - A || 18.2 (4.5 ~ 18.2) / 19.9 |
| Power Input - Cooling - W || 4,000 |
| Power Input - Heating - W || 3,650 |
| Fuse or Circuit Breaker Capacity - A || 45 |
| Features |
| Controls || Microprocessor |
| Low Ambient Control || Built-in 0¿F |
| Wireless Remote Controller || Included |
| Wired Remote Controller (optional) || CZ-RD515U & CZ-RC515UA |
| Fan Speeds || Hi / Me / Lo & Auto |
| Timer || 1hr OFF and 24-hr Program |
| Air Deflection - Horizontal || Manual |
| Air Deflection - Vertical || Automatic |
| Air Filter || Washable |
| Refrigerant || R-410A |
| Refrigerant Control || Electric Expansion Valve |
| Operation Sound - In(Hi / Me / Lo/ Qt) dB-A || 49 / 44 / 39 |
| Operation Sound - In (Hi/Lo/Q-Lo) dB-A || - |
| Operation Sound - Outdoor (Hi) dB-A || 55 |
| Refrigerant Piping -Type || Flare |
| Refrigerant Piping - Discharge - inches || 3/8" |
| Refrigerant Piping - Suction - inches || 5/8" |
| Refrigerant Pipe Length - ft || Max. 164 |
| Elevation Difference - Outdoor Above - ft || Max. 100 |
* This is maximum elevation difference when the indoor unit is located above the outdoor unit."
| Elevation Difference - Outdoor Below - ft || Max. 50 |
* This is maximum elevation difference when the indoor unit is located above the outdoor unit."
| Dimensions & Weight |
| Height (inches) || Indoor Unit: 11-3/16" |
Outdoor Unit: 35-13/16"
| Width (inches) || Indoor Unit: 41-15/16" |
Outdoor Unit: 37-1/32"
| Depth (inches) || Indoor Unit: 9-1/16" |
Outdoor Unit: 13-3/8"
| Net Weight (lbs.) || Indoor Unit: 32 |
Outdoor Unit: 185
This item is brand new and comes with a full manufacturer warranty. Please refer to the table below for details
Don't Gamble on a break-down!
- 100% Parts and Labor
- No Deductibles
- No Lemon Guarantee
- Toll-Free Support
- Fully Transferable
- Nationwide Coverage
- Rapid Claim System
||Extended Service Plan
||Typical Manufacturer Warranty
||Up to 5 Years including parts and labor
||1 Year Parts, 90 Days Labor
|Wear and Tear(Normal Use)
|Product Replacement (If Product Cannot be Fixed)
|Optional Accidental Damage
|Screen or Lens Replacement
|24/7 Toll Free Help
|No Lemon Policy
|Authorized Service Centers in Most Locations
What exactly is an Extended Service Plan?
An extended service plan is generally an extension of your original manufacturer's warranty. Most manufacturers warranty their products to be free from defects for up to one year from the date of purchase. This warranty virtually guarantees you that if your newly purchased product fails, the manufacturer will protect you from the high costs of replacement parts and labor necessary to repair your product. Extended service plans lengthen your product's coverage for up to an additional 60 months (5 years) to insure you get years of performance satisfaction from your newly purchased product.
How is this different than the manufacturer's warranty?
A manufacturer's warranty usually offers limited coverage for a limited time, with parts and labor carrying separate lengths of coverage. For example, a common manufacturer warranty of a product might cover a consumer for one full year on parts defects but only 90 days on the high cost of labor involved to change those parts. Extended service plans provide comprehensive, long term, even length coverage. This means that should your product fail within your plans coverage time frame, both parts and labor costs are covered.
How do I buy an Extended Service Plan?
Extended Service Plans can be purchased along with your product online, or via our toll free number.
Can I renew my Consumer Priority Service extended service plan?
Yes, service plans are renewable and must be submitted 30 days prior to the original plans expiration. Please contact a sales representative to discuss your renewal options.
What should I do if I need extended service?
Our extended service providers offer an easy to use interactive form online which you may use to request that they initiate a claim on your product. Your other alternative is to call the toll-free number on your extended warranty card or email and have a qualified representative make this request for you with the information you will provide. We believe that our claim initiation request process is the absolute best our industry has to offer. It is designed for simplicity and speed.
Who will perform the service on my product?
Our company works with over 11,000 authorized service professionals. Each technician is extensively trained by the respective manufacturers to provide service on your products. Authorized technicians must complete annual and bi-annual continued education exams in addition to being well versed in manufacturer supplied update bulletins to ensure their level of expertise is as current as the new products which come to market. We urge our customers to provide feedback regarding their experiences which we later use to insure that the level of service we are expected to provide is exactly the level of service you receive.
May I transfer my extended service plan to another person?
Our service plans are 100% transferable. If you would like transfer ownership of the covered product along with its coverage, we require that the request be supplied in writing. For assistance please contact a Representative. Please have all of the new owner's information at hand when requesting a transfer.
Will I have to pay a deductible or any other "hidden costs"?
Generally, the amount of a deductible is almost always proportional to the amount of the premium charged. In order to have a lower deductible, even as low as $0, the plan holder would generally have to agree to a higher premium. For those who want lower premiums, they must agree to a higher deductible. Our extended service plans carry a $0.00 deductible along with low premiums. This means that with an extended service plan there are no high upfront costs and they are committed to cover 100% parts and labor costs on any authorized claim.