Amana's new DigiSmart technology has dramatically raised the bar in PTAC controls and offering many programmable features and self-diagnostics. By maintaining lower humidity levels in rooms while cooling them without the need for expensive add-ons, Amana PTACs allow you to feel more comfortable at higher temperatures, thus reducing your cooling costs
With an EER of 11.2 / 11.5, the unit's high efficiency may qualify you for rebates offered by electrical power companies.
This is Amana's quietest PTAC yet. The unit's state-of-the-art design and construction provide a quiet environment, allowing you to enjoy peaceful, sleep-filled nights with a STC (Sound Transmission Class) of 28.
Two Fan Motor Design
Amana uses a two fan motor design, one indoor and one outdoor. The indoor tangential fan creates a quiet operating environment.
Made in the USA
Amana PTACs are assembled in the USA. Amana has been doing this for 30 years. Amana uses Goodman resources including engineering, production, and testing in their Fayetteville, TN, plant.
Amana tests every PTAC during assembly in their Fayetteville, TN plant and again prior to shipment. They also perform leak tests.
Amana PTACs have one of the industries' shallowest front depths at only 7 5/8". The front panel may be secured to the chassis with a hidden screw which helps prevent unauthorized tampering with the PTAC.
Amana's removable condenser shroud allows easy access to enable regular cleaning of coils, which is essential to maintain unit efficiency and protect the compressor for long unit life. Every Amana PTAC comes with easy to pull-out filters which are washable and easy to maintain.
Built to Last Long
Amana PTACs include a filter dryer for the sealed system refrigerant. This protects the compressor and lengthens the life of the PTAC by removing moisture and preventing acid formation.
Easy to Use
Every Amana PTAC has a 7-button touch pad and LED Display. This makes it easy to use and set the temperature to your liking.
Condensate Dispersion System
The Amana Condensate Dispersion System removes condensate from indoor cooling operation by throwing water directly on to the outdoor coil for rapid evaporation and increased cooling efficiencies. The slinger ring on the new, enhanced fan draws water up and into the fan blades. This water is then atomized and evaporated into the atmosphere through the condenser. Increased surface area from the coil allows more water to be evaporated on the sides of the coils and helps to minimize condensate run-off.
Front Desk Control
Front Desk Control is a useful feature for motels, hotels, and other multi room establishments. Each unit comes equipped with the DigiSmart™ control and energy management software. With Digi-Smart™, using the optional RF antennae, all units can be wirelessly connected to a central hub for enhanced energy savings and diagnostics. Amana brand PTACs also has a low-voltage interface capability with a field-supplied front-desk ON/OFF switch. Call us for more details.
Every Amana PTAC has room freeze protection. If the PTAC senses temperatures of 40°F or below, automatically the unit activates the fan motor and either the electric resistance heater or the hydronic heater will be activated.
Amana's compressor lock-in feature helps prolong compressor life by preventing short-cycling. When the compressor is switched from Off to On because room temperature has risen or fallen below the specified limit, it will remain on for at least 4 minutes. If the temperature set-point is changed during these 4 minutes, the lock-in feature is overridden.
- Amana's newly designed front and neutral color make it compatible with virtually any room decor.
- Amana has engineered an easy to read diagnostic system using on-board LEDs taking out the guess work should a problem arise.
- Amana's use of a stonewood room front balances practical design and attractive styling. Add the fact that the sleek 7 5/8" depth maximizes the usable space of your room.
- Amana's PTACs can be installed flush to a finished floor if desired.
- Amana's built-in 30 second fan-off delay allows the fan to continue after the compressor stops. This feature improves efficiency by dispersing the heated or cooled air into the room instead of wasting the conditioned air and leaving it on the coils.
- With the use of the 7 button control panel, you can override the predetermined fan mode for either continuous operation or cycle mode with the thermostat on a temporary basis.
- Hidden ventilation control allows you to manage ventilation requirements.
| Primary Heating:|| Yes|
| Auxiliary Heating:|| No|
| Voltage:|| 230/208 V|
| Electric Heat:|| 3.5 kW|
| Heating Power:|| 12,000 BTU|
| Width:|| 42"|
| Depth:|| 21.5"|
| Height:|| 16.0625"|
| Weight:|| 102 lbs|
Buy more, save more. Watch your savings grow.Please Note: It is the sole responsibility of the customer to download, fill up and mail the rebate within the allotted time period. Please make sure to follow all instructions. AppliancesConnection cannot be held responsible for rebates which are denied or not claimed.
(Valid: 02/01/2014 - 12/20/2014) [Download Rebate Form]
A minimum of 2 items must be added to the cart to be qualified. The qualifying discount amount depends on the brand and the value of your cart and item(s) total. If you qualify for the AppliancesConnection exclusive instant savings discount you will see a green badge below the items in your cart with the amount of savings for shopping with us.
You will need Adobe Acrobat Reader to view and print pdf files.